Hello Christopher, * On Tue, Mar 27, 2012 at 10:21:37AM -0500 Christopher Pow wrote: > I am trying now with VICE 2.3.16 *UNSTABLE* (win32 x86 msvc). It > The reason I had to do it this way is that it seems that I'm locking > up the machine if I try to just do a "load" right after connecting or > right after reset [makes sense, anyway]. So, I thought I'd check to > see what address the machine is at when it's sitting at the READY > prompt. $e5d1 is what I got, so $e5d1 is what I used. > > It seems to me there must be an easier method to determine whether or > not the machine is ready for a "load" command? I'd recommend setting a breakpoint on $A474 (C64) ($C474 VIC20), as this is the BASIC routine where the READY prompt is output. Regards, Spiro. -- Spiro R. Trikaliotis http://opencbm.sf.net/ http://www.trikaliotis.net/ http://vice-emu.sf.net/ ---------------------------------------------------------------------- To unsubscribe from the list send mail to majordomo@musoftware.de with the string "unsubscribe cc65" in the body(!) of the mail.Received on Tue Mar 27 20:47:29 2012
This archive was generated by hypermail 2.1.8 : 2012-03-27 20:47:31 CEST